Tags |
|
|
Links |
|
|
Business Dump - Replacing Switches and Receptacles in a Home - DIY Pitfalls
You might be considering replacing switches and receptacles (outlets) around the house. It sounds like a harmless electrical project, as long as you work with th
According to USFDA, a combination product is one composed of any combination of a drug and device; biological product and device; drug and biological product
e power off. But you may not be aware of some likely pitfalls.
In the living room or bedroom, is the top or bottom half of an outlet controlled by a switch? If
In the living room or bedroom, is the top or bottom half of an outlet controlled by a switch? If
; or drug, device, and biological product and fixed dose combination would include two or more combinations of drug.
Examples of combination products may in
Examples of combination products may in
ou replace such a switched outlet without keeping good track of where the wires connected, and if you don’t know a certain secret, things won’t work quite the sa
lude drug-coated devices, drugs packaged with delivery devices in medical kits, and drugs and devices packaged separately but intended to be used together.
me there when you’re done. Your new half-switched receptacle needs to have its two halves isolated from each other, just as the old one had. This won’t happen by
here is enormous increase in the number of combination products entering the market in the recent years. Combination products have proven advantages but fixe
magic. You have to break off a metal tab located on the live (hot) side, and don’t break the one on the other (white) side.
Receptacles in general need some car
Receptacles in general need some car
d dose combinations are still in the process of convincing regulatory authority on their advantages over the single ingredient formulations.
Combination pro
Combination pro
e in how wires are connected to them. I will give just one example. Suppose the old receptacle had the wires pushed into holes on the back. Maybe you heard that
ucts have become life saving products for the pharmaceutical companies who doesn’t have many innovative molecules in their product pipeline and have been inc
more reliable connection method is to attach them to the screws on the side. Well, once you get the wires loose from the old outlet (with a very small screwdriv
easingly used in the product life cycle management. Even the companies having product patents are trying to extend their product life cycle through the combi
er or some twisting), your new connections at the screws might be worse than before if you don’t strip a little more insulation off each wire. Otherwise, some of
nation products and maximize the revenues. But the companies involved in this practice are overlooking that they are burdening the patients both economically
that insulation can easily get trapped under the screw also. This connection would feel tight but would not be tight on the copper itself. Down the road, the con
and physically. They need to rightly judge the benefits of the combination products and they have to even look at the risks involved when combining the produ
nection could easily fail, leaving a room or two dark.
A new switch you want to put in is likely to be a little different from the old one. For one thing, switc
A new switch you want to put in is likely to be a little different from the old one. For one thing, switc
ts. Some of the combination products were well accepted by physicians while others suffered. Companies involved in development of combination products are fi
es didn’t used to have the green ground screws they do now. That screw is meant to receive one (bare) wire extending to it from all the other bare (or green) gro
ding difficulty in defining their combination products and facing various challenges from selecting a combination to marketing it.
Following aspects would a
Following aspects would a
und wires in the switch box; you will probably have to supply this wire and connect it to the others with a wirenut.
If a switch you took out had more than two
If a switch you took out had more than two
dd to the challenges in developing combination products:
Which markets to tap where the combination products can do fairly well?
Which combination prod
Which markets to tap where the combination products can do fairly well?
Which combination prod
lack wires attached to it, the two of those that were close together should be paired in a similar way on the new switch. Also, if a switch you want to replace c
cts are meaningful and rational?
Which therapeutic categories to select?
Which Combinations can address unmet needs of the patients?
Do combin
Which therapeutic categories to select?
Which Combinations can address unmet needs of the patients?
Do combin
ontrolled lights in conjunction with a switch at the other end of the room, hall, or stairs, it is a three-way switch (3 non-green screw terminals) or a four-way
tions increase the patient compliance?
What would be the developing cost?
How to tackle the risks encountered during combination product developmen
What would be the developing cost?
How to tackle the risks encountered during combination product developmen
switch (4 non-green terminals). So you have to buy new switches with the same designation. And if you don’t keep track of where the different wires connected on
t?
As combination products don't fit into the traditional categories of drugs, medical devices, or biological products, the USFDA is in the process of devel
As combination products don't fit into the traditional categories of drugs, medical devices, or biological products, the USFDA is in the process of devel
the old 3-way switch and duplicate that on the new one, there is only a chance that you will get this set of switches to work the lights as they used to -- on yo
ping new procedures for reviewing their safety, efficacy and quality.
Professional from academic institutions, pharmaceutical industries, health care indust
Professional from academic institutions, pharmaceutical industries, health care indust
r first try it is only an 11% chance!
Finally, if you are replacing old toggle-style switches with the “rocker” or “decorator” style, you may be in for some con
Finally, if you are replacing old toggle-style switches with the “rocker” or “decorator” style, you may be in for some con
y and representatives from various regulatory agencies are working out to design the regulatory requirements for manufacture and sale of combination products
fusion in the case of 3-way switches. Some 3-ways of this new style have their terminals aligned in a way that does not correspond to the old toggle’s arrangemen
.
As there is an increasing trend of the combination products companies manufacturing such products should be able to tackle the problems involved in the de
As there is an increasing trend of the combination products companies manufacturing such products should be able to tackle the problems involved in the de
. A tip here is that whichever two wires were connected at the two same-color screws on the old switch should go to the same-color screws on the new one, with th
elopment. They need to be wiser in analyzing the market trends and the regulatory requirements.
Companies that provide selfless information through particip
Companies that provide selfless information through particip
e wire that went to the one odd-colored screw on the old one going to the odd-colored screw on the new one.
Still want to tackle that project? More power to you
Still want to tackle that project? More power to you
tion in industry events and feedback to regulatory authorities would be able to face the challenges and will be successful in developing combination products
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.businessdump.org.ua/article/346582/businessdump-Replacing-Switches-and-Receptacles-in-a-Home--DIY-Pitfalls.html">Replacing Switches and Receptacles in a Home - DIY Pitfalls</a>
BB link (for phorums):
[url=http://www.businessdump.org.ua/article/346582/businessdump-Replacing-Switches-and-Receptacles-in-a-Home--DIY-Pitfalls.html]Replacing Switches and Receptacles in a Home - DIY Pitfalls[/url]
Related Articles:
How to Find Public Domain Content
Bookmark it:
|